An unapproved pergola or deck doesn’t automatically prevent a NSW home sale. You can sell, but tell your agent and prospective buyers what you know about its approval status. Selling a house with an unapproved pergola or deck in NSW is easier to manage when you separate documented facts from assumptions and keep relevant records together.
It’s understandable to assume an older structure is compliant if it has been part of the home for years. But its age and appearance don’t establish whether approval was required or obtained. The key question is how it fits the applicable NSW requirements and what records are available about its history.
This guide explains what can make a pergola or deck unapproved, how council requirements and records can clarify its status, and what to communicate during a sale. It also covers why buyers may raise compliance, safety or insurance concerns, and how clear information can keep discussions focused as the sale progresses.
Key Takeaways
- Find out whether the pergola or deck has approval, qualifies for an exemption, or has unresolved approval requirements before the sale progresses.
- Council planning and building records can help clarify a structure’s approval history and identify missing final certificates.
- Check the relevant NSW exemption criteria, including the structure’s size, height and distance from boundaries.
- Tell your real estate agent and prospective buyers what you know about the structure’s approval status.
- Be prepared for buyers to consider compliance, safety and insurance concerns during due diligence and negotiations.
Buyer compliance, safety and insurance concerns
Yes, you can sell a NSW house with an unapproved pergola or deck. Its status may still affect buyer due diligence, discussions about risk and the terms negotiated before settlement.
Buyer compliance concerns
Buyers may raise compliance concerns if they can’t establish what approval applies to an outdoor structure. A conveyancer may ask for documents about the pergola or deck and flag gaps before the buyer commits to proceeding. The buyer may withdraw, seek a price reduction or ask for the issue to be resolved before settlement. A clear response helps keep the discussion focused on the specific concern.
Safety and council consequences
Safety concerns relate to the structure’s condition and possible hazards, not simply its approval history. A buyer might question a deck with visibly loose boards or a pergola with unstable supports. Council consequences may include demolition orders or fines for unapproved structures. In NSW, maximum penalties for many breaches can reach A$500,000 for individuals and A$2 million for corporations. These are maximum penalties, not automatic fines for every structure.
Insurance and property-sale risks
Insurance concerns can arise if an insurer may not cover an incident involving an unapproved area. A buyer may ask how the structure’s status affects its intended use or their risk assessment. If due diligence uncovers unapproved work, the buyer may also seek a price reduction or request a legal indemnity. These possibilities can influence negotiations, but depend on what the parties agree during the sale.
When a buyer raises concerns, separate three questions: whether the work has approval, whether the structure appears safe, and how insurance may respond to an incident. A building inspection can address visible condition issues, while approval records describe council history. Neither answers every question. Keeping these issues distinct helps avoid presenting an inspection observation as proof of approval, or an approval document as proof of current condition.
For example, a buyer’s conveyancer may ask about a deck’s approval while the buyer’s inspection identifies movement in one section. Treat these as separate enquiries. Provide relevant records for the approval question and respond to the inspection concern on its own terms. If the parties discuss a repair or another resolution, record the proposal clearly and have the conveyancers address any contract changes.
Use precise wording for insurance questions. Don’t assume every insurer will respond identically or that an unapproved structure automatically makes all property cover invalid. The relevant issue is whether a particular incident involving that area is covered. A buyer may want to consider this risk before proceeding, which can affect negotiations even if no incident has occurred.
For sellers, the practical priority is to avoid surprises during due diligence. Keep the information you provide consistent, answer specific questions directly, and distinguish known facts from assumptions. This gives the buyer a clearer basis for assessing compliance, safety and insurance concerns before deciding how to proceed.
What Are Unapproved Structures?
A structure may be unapproved if work proceeded without a required Development Application or Building Approval. The issue can also arise when required final certificates are missing, leaving approval incomplete, or when an approval has lapsed. For example, a pergola may have an approval document but no record that the required final stage was completed.
Start with the property’s council planning and building records. Requests can usually be made online and usually incur a fee. Ask for records relating to the pergola or deck, including approved plans, decisions and final certificates. A general property file may include documents for the house but not a later outdoor addition.
Check what work each document covers. Compare the approved plan with the existing structure’s footprint, roof and position. For example, a plan may show an open pergola, while the existing structure has enclosed sides. That difference gives buyers and sellers a specific point to clarify, rather than relying on the structure’s age or appearance.
Keep records in date order, including council letters and documents from later building work. Note whether each document is an application, an approval or a final certificate. They describe different stages: a lodged application doesn’t establish that approval was granted, and an approval document alone may not show that all required final steps occurred.
NSW council requirements can vary with a property’s planning controls. Heritage status, zoning and location in a bushfire area may affect which requirements apply. An exemption that appears relevant to one site may not apply to another. The property’s own council records and applicable controls are important when assessing a pergola or deck.
A building inspection can document visible condition, such as movement, wear or deterioration. It doesn’t establish whether council approval was obtained. Keep the inspection report separate from planning records. If the report notes a concern, a suitably qualified building professional can explain the observed issue; council records address approval history.
If a record is unclear, identify the exact gap before making enquiries. For instance, distinguish a missing final certificate from a missing approval decision. This helps council staff understand what information is needed and helps a conveyancer explain the file to a buyer. A dated document list also makes sale discussions more precise.
Council confirmation that approval is not required
A council may provide written confirmation that a small project doesn’t require approval. That can help clarify the position when an existing pergola or deck has no approval record.
There is no single NSW-wide fee for council approval, retrospective approval or a Building Information Certificate. Charges depend on the council and application type. Ask the relevant council for its current fee schedule before lodging an application.
First, identify the local council responsible for the property. Describe the existing structure and explain what confirmation you need. Include available plans, dimensions, photographs and earlier council correspondence. Clear information helps council staff understand whether you’re asking about an exemption, missing approval or completed work.
A request to confirm that approval is unnecessary differs from seeking approval for work that required consent. If a small project meets applicable exemption requirements, the council may confirm in writing that approval wasn’t required. Keep that response with the property records and provide it during the sale.
If development or building approval is missing, retrospective approval may be possible, but it isn’t automatic. The council’s assessment considers the structure and relevant planning controls. For example, a pergola built without approval may need assessment against its location, size and design before the council can determine an outcome.
Incomplete approvals need separate attention. A development consent or building approval may exist while required final certificates are absent. An approval may also have lapsed before the work was completed. Gather the approval documents and identify the missing step; don’t describe an unfinished approval process as final approval.
A Building Information Certificate involves applying to the relevant council about existing building work. A practical sequence is to identify the council, obtain its application requirements, describe the work, supply available plans and photographs, pay the applicable fee and respond to requests for information. The council then assesses the material under its process.
A certificate and retrospective approval are not interchangeable. A certificate relates to existing work; retrospective approval addresses work that required approval. Neither should be described as confirming more than the council’s written decision states. Keep the outcome, conditions and supporting documents together.
If the council requires changes, ask for the decision and required action in writing. The outcome may involve rectification, further assessment or removal of the structure. Record any agreed work and completion documents. This gives buyers a clear account of what was submitted, what the council decided and whether the required action was completed.
Combined area limits for decks, patios and verandahs
NSW exemptions set size and placement limits for some decks, pergolas, patios and verandahs. An exemption applies only when the structure meets the relevant requirements; a size below the limit alone does not establish compliance.
For exempt development, pergolas, patios and verandahs can have an area of up to 25 m² and a height of no more than 3 m. They must generally sit at least 900 mm from the boundary. An exempt deck can also have an area of up to 25 m², with its floor no more than 1 m above ground. It must generally be at least 900 mm from the boundary.
Those limits relate to different structure types. A 5 m by 5 m pergola has an area of 25 m². A 4 m by 6 m deck has an area of 24 m². These examples illustrate area only; they do not establish that either structure qualifies for an exemption. Height, boundary distance and other applicable requirements still matter.
Where a property has several outdoor structures, don’t assume each one has a separate 25 m² allowance. The relevant exemption and how it applies depend on the structures and site. A deck beside a covered patio, for example, may need to be considered alongside the patio when assessing what work exists. Ask the local council for written clarification if the applicable area limit is unclear.
Measure and describe each structure accurately before relying on an exemption. Record its area, height, distance from boundaries and whether it is a deck, pergola, patio or verandah. Compare these details with the plans and council records. If the structure as built differs from the plans, the approved documents may not reflect the work now on the property.
The 25 m² figure is not a general approval for every outdoor addition. A structure that exceeds a relevant limit, sits too close to a boundary or has a deck floor above the stated height may fall outside the exemption. That does not by itself determine the approval pathway. It means the exemption should not be relied on without assessing the applicable requirements.
For a sale, keep the calculation and supporting plans with the property documents. If the deck measures 24 m² but stands more than 1 m above ground, its area alone does not establish exemption eligibility. Similarly, a 25 m² pergola must also meet the stated height and boundary-distance limits. Explain the measured facts to your agent and buyers, rather than describing the structure as exempt based only on its footprint.

Disclosure to agents and prospective buyers
Tell your real estate agent about an unapproved pergola or deck before marketing begins, and share the same information with prospective buyers during sale discussions. When selling a house with an unapproved pergola or deck, describe NSW council compliance accurately without implying approval that the records don’t support. Early, consistent disclosure helps buyers assess the issue during due diligence.
Give your agent a clear written summary. Identify the structure, what you know about its approval status and any steps already taken with the council. Separate documented facts from assumptions. For example, say the council records don’t contain an approval document rather than describing the structure as approved because it has stood for years.
Provide supporting documents where available, such as council correspondence, plans, certificates, inspection reports, photographs and records of later alterations. Explain what each document relates to. A plan for an earlier design, for example, may not show the deck’s current size or position. Label documents clearly so your agent or a buyer can understand their relevance.
Ask your agent to use accurate wording in listing information and responses to buyer enquiries. Avoid calling a structure “compliant” or “council approved” unless records support that description. If its status remains unresolved, explain what’s known and identify the missing information. Consistent wording helps prevent one description appearing in advertising and another during negotiations.
Keep a record of what you provide and when. Save the summary sent to your agent, copies of documents and written responses to buyer questions. If a buyer asks whether approval exists, answer directly and provide relevant records. If you later receive council information, share it promptly so the information given to buyers stays current.
When selling a house with an unapproved pergola or deck, NSW council compliance concerns may influence negotiations. A buyer may withdraw, seek a price reduction or ask you to resolve the issue before settlement. They may also request a legal indemnity. These are possibilities, not automatic outcomes. Record any proposed condition or agreement in the sale discussions.
If the status is unclear, describe the uncertainty precisely. For example, distinguish having no approval documents from knowing that the council refused an application. Those are different facts. Don’t imply an application is underway unless it has been lodged, or that work is complete unless records show completion.
Your conveyancer can advise how disclosure and any proposed resolution should be reflected in the sale documents. Give them the same records and summary supplied to your agent. Clear, consistent information helps buyers assess the issue and make informed decisions, while reducing the risk of conflicting statements during the sale.
RealHelp Real Estate
RealHelp Real Estate provides Property Sales and Marketing for sellers preparing to take a home to market. If a pergola or deck has unresolved approval status, involve your agent early so the campaign can present known information clearly and consistently. Keep council records and correspondence available, and distinguish documented facts from assumptions in sale discussions.
RealHelp Real Estate serves Sydney, NSW, and can help you plan the marketing of your property with this issue in mind. Its role is to support the sale process, not determine council compliance or provide legal advice. For guidance on presenting your property for sale, contact RealHelp Real Estate to discuss your next steps.
Plan your next move with clear information
Selling a house with an unapproved pergola or deck in NSW is easier to manage when your next steps are based on clear records and consistent communication. Keep the sale moving by sharing relevant information with your agent and conveyancer, and decide how you’ll respond if a buyer raises the structure during negotiations.
RealHelp Real Estate offers Property Sales and Marketing for sellers, Residential Property Management for property owners, and Buyer’s Agent Services for buyers. The right support depends on your plans, whether you’re preparing to sell, managing a home or considering another purchase.
Contact RealHelp Real Estate to discuss your property plans and the next practical step. With the issue addressed openly, you can move forward with greater clarity.
Frequently Asked Questions
The council said my project is exempt but I’m still worried. What do I do?
Keep the council’s written response and compare it with the structure as built. Check that the confirmation describes the same design, dimensions and location, and note any conditions. If the pergola or deck has changed since the enquiry, explain the differences to the council and seek updated written clarification. Store the response with plans and other property records for future buyer enquiries.
What’s the difference between a DA and CDC?
A DA, or Development Application, is a request for development consent. A CDC, or Complying Development Certificate, is a separate approval pathway for work that meets applicable development standards. They are not interchangeable. The applicable pathway depends on the proposed work and the property’s planning controls. For an existing pergola or deck, the approval record should identify the pathway used, if approval was obtained.
Does a pergola or deck in NSW require council development consent or a complying development certificate?
Not every pergola or deck needs a DA or CDC, because some work may qualify as exempt development. For example, an exempt pergola can be up to 25 m² and 3 m high, generally at least 900 mm from the boundary. An exempt deck can be up to 25 m², with its floor no more than 1 m above ground. Other applicable requirements and site constraints also matter.
How can a buyer or seller check whether a NSW pergola or deck has council approval?
Request the property’s planning and building records from the local council, then identify documents relating to the outdoor structure. Look for approval documents, plans and required final certificates. Compare the approved design with the existing pergola or deck, including its footprint and position. If the records don’t answer a specific question, write to the council describing the structure and asking what its records show.
What are the risks and legal consequences of selling a property with unapproved building work in NSW?
Council action can include an order to remove a structure or fines. Maximum penalties for many NSW breaches can reach A$500,000 for individuals and A$2 million for corporations; these are maximums, not automatic fines in every case. During a sale, a buyer may raise the issue, seek a price reduction or ask for it to be resolved before settlement. Keep council documents and buyer communications organised.
Can an unapproved deck or pergola receive retrospective approval in NSW?
Retrospective approval may be possible, but it isn’t automatic. The council considers existing work against applicable requirements and the site’s planning controls. Gather plans, photographs and information about the structure before making an enquiry. The council may require further information or changes, and the outcome could involve rectification or removal. Keep any decision and conditions in writing for your sale records.
Should a seller disclose an unapproved pergola or deck in the NSW contract for sale?
Tell your real estate agent and conveyancer about the structure and its known approval status before sale documents are prepared. Give them relevant council records and correspondence so the contract and related disclosures can be considered accurately. Don’t label the structure approved based on appearance or age alone. Your conveyancer can advise how the information should be recorded in the contract for your transaction.
Can a buyer require removal or approval of an unapproved deck or pergola before settlement?
A buyer can ask the seller to address the issue before settlement, including by seeking removal or resolution of approval concerns. Whether this becomes a requirement depends on what the parties agree and the sale contract’s terms. A buyer should put any proposed condition in writing during negotiations. Sellers should review proposed changes with their conveyancer before agreeing, particularly if timing or settlement obligations could be affected.
Disclaimer
The information in this article is provided for general information and educational purposes only and is not intended to constitute legal, financial, tax, investment, valuation or other professional advice. Property markets, legislation, regulations, fees and other circumstances can change, and information may become outdated. Readers should independently verify information relevant to their circumstances and obtain appropriate professional advice before making any property, financial, legal, tax or investment decision. While RealHelp Real Estate and Sayed Ahmad aim to provide accurate and useful information, no guarantee is made regarding the accuracy, completeness or currency of the information provided. To the extent permitted by law, RealHelp Real Estate, Sayed Ahmad and their respective officers, employees and representatives disclaim liability for any loss or damage arising from reliance on information contained in this article. Publication of an article does not create a client, agency, advisory, fiduciary or other professional relationship unless separately agreed in writing.
